Home > Hp Elitedesk > Hp 8200 Elite Bios Key

Hp 8200 Elite Bios Key

Contents

Default is disabled. Setup Password requires that the setup password be entered to boot the computer if the sensor detects that the cover has been removed.. BIOS version 7 or greater To move through the BIOS, use the keyboard keys as listed in the following table: Key on keyboard Description of function Left or right arrow key IDE - This is the most backwards-compatible setting of the two options.

Controls the virtualization features of the processor. Default is enabled. Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup. Options are Disabled, LOs, L1, LOs and L1.

Hp 8200 Elite Bios Key

Turn on the computer and immediately press the F10 key repeatedly until a BIOS Setup screen opens. I've tried clearing the CMOS. Secure Boot Configuration This is a feature of Windows 8. Default is enable.

  • If the POST detects an error before this point, a beep code is generated instead.
  • Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot.
  • Allows certain operating systems to reduce processor voltage and frequency when the current software load does not require the full capabilities of the processor.
  • Reply 0 Reply 0 0 Everyone's Tags: HP 8200 compaq elite SF…Microsoft Windows 7 (64… View All (2) « Message Listing « Previous Topic Next Topic » Related Documents HP PCs
  • Each sleep state has a unique blink pattern.
  • Changing this setting requires that you restart the computer.
  • Default is-enabled.
  • Model Displays the model number of the device.
  • Enabling this feature will cause the system to display POST error messages, which are error messages displayed on the monitor during the Power On Self Test if the BIOS encounters some

F5 can be used to disable individual boot items, as well as disable EFI boot and/or legacy boot. The AMT settings are restored to factory defaults. Restore Factory Settings as Default: Restores the factory system configuration settings as the default. Hp Elitedesk 800 G1 Bios Update POST Delay (None, 5, 10 15, or 20 seconds).

Apply Defaults and Exit - Select this to return the computer to the default settings and exit from Setup. Hp Elitedesk 800 G2 Bios Settings When you establish only a setup password, any user can access all the information on the computer except Computer Setup. Enable or disable removable media boot ability. System Recovery Boot Support (Enable/Disable).

See the Advanced menu screen. Hp Elitedesk 800 G2 Boot From Usb Option ROM Prompt (enable/disable). SATA Defaults Storage Options SATA Emulation Allows you to choose how the SATA controller and devices are accessed by the operating system. Default is enable.

Hp Elitedesk 800 G2 Bios Settings

S5 Maximum Power Savings—Turns off power to all nonessential hardware when system is off to meet EUP Lot 6 requirement of less than 1 Watt power usage. Figure 34: Power-on Options screen The following options are found in the Power-On Options: Power-On Options Menu Settings POST (Power On Self Test) Messages Enable or Disable After Power Loss Previous Hp 8200 Elite Bios Key Was the information on this page helpful? Hp Elitedesk 800 G1 Bios Key To change the setting from Enable to Disable, use the up and down arrow keys to move to the port.

This option will restore the original factory system defaults. EFI boot sources always have precedence over legacy boot sources. Press Esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. hmmm.... 1 Pimiento OP lester.nubla Dec 11, 2012 at 1:49 UTC 1st Post All our 8200 Elite behaves this way when RAM is upgraded or downgraded! Hp 8200 Boot Menu

Password prompt on F9 & F12 (requires setup password to use these boot functions). F10 Saves the current values and returns to the previous menu. Establish an Ownership Tag, the text of which is displayed each time the system is turned on or restarted. Clears memory on all boots.

Previous state - causes the computer to power On automatically as soon as power is restored, if it was On when power was lost. Hp Elitedesk 800 G1 Factory Restore Press F10 to accept the changes, or ESC to cancel and return to the previous menu without saving. Computer Setup—Power Support for specific Computer Setup options may vary depending on the hardware configuration.

Changing this setting requires turning the computer off and then back on.

Default is disabled. Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing, the F10 Setup Options without entering setup password). See Computer Setup (F10) UtilityComputer Setup (F10) Utility for information on backing up the CMOS settings. Hp Elitedesk 800 G2 Pxe Boot Ignore Changes and Exit - Select this to ignore the changes and exit from Setup.

Was the information on this page helpful? About - Displays information about the setup utility. See the Desktop Management Guide for more information. Figure 19: DPS Self-test screen A screen displays showing the estimated time to complete the test.